Agonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assayAgonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assay
Agonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assayAgonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assay
Agonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 1 to 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assayAgonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Agonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assayAgonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assay
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Agonist activity at human OX2 receptor expressed in CHO cells assessed as increase in Ca2+ accumulation level measured after 24 hrs by FLIPR calcium 4 assayAgonist activity at human OX2 receptor expressed in CHO cells assessed as increase in Ca2+ accumulation level measured after 24 hrs by FLIPR calcium 4 assay
Agonist activity at human OX2 receptor expressed in CHO cells assessed as increase in Ca2+ accumulation level measured after 24 hrs by FLIPR calcium 4 assayAgonist activity at human OX2 receptor expressed in CHO cells assessed as increase in Ca2+ accumulation level measured after 24 hrs by FLIPR calcium 4 assay
Agonist activity at human OX2 receptor expressed in CHO cells assessed as increase in Ca2+ accumulation level measured after 24 hrs by FLIPR calcium 4 assayAgonist activity at human OX2 receptor expressed in CHO cells assessed as increase in Ca2+ accumulation level measured after 24 hrs by FLIPR calcium 4 assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Agonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assayAgonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assay
Agonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assayAgonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assay
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Agonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assayAgonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assay
Agonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assayAgonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assayAgonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assay
Agonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assayAgonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assayAgonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assay
Agonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assayAgonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assayAgonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assay
Agonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assayAgonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assay
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assayAgonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assay
Agonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assayAgonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assayAgonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assayAgonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at OX2 receptor (unknown origin) expressed in RD-HGA16 cells assessed as calcium mobilization by fluorescence assayAgonist activity at OX2 receptor (unknown origin) expressed in RD-HGA16 cells assessed as calcium mobilization by fluorescence assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at mouse OX2R expressed in HEK293 cells by AP-TGFalpha reporter assayAgonist activity at mouse OX2R expressed in HEK293 cells by AP-TGFalpha reporter assay
Agonist activity at mouse OX2R expressed in HEK293 cells by AP-TGFalpha reporter assayAgonist activity at mouse OX2R expressed in HEK293 cells by AP-TGFalpha reporter assay
Agonist activity at mouse OX2R expressed in HEK293 cells by AP-TGFalpha reporter assayAgonist activity at mouse OX2R expressed in HEK293 cells by AP-TGFalpha reporter assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assayAgonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assay
Agonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assayAgonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assayAgonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assayAgonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at mouse OX2R expressed in HEK293 cells by AP-TGFalpha reporter assayAgonist activity at mouse OX2R expressed in HEK293 cells by AP-TGFalpha reporter assay
Agonist activity at mouse OX2R expressed in HEK293 cells by AP-TGFalpha reporter assayAgonist activity at mouse OX2R expressed in HEK293 cells by AP-TGFalpha reporter assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assayAgonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assay
Agonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assayAgonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assay
Agonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assayAgonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assay
Agonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assayAgonist activity at OX2R (unknown origin) expressed in CHO cells by cell-based calcium assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assayAgonist activity at human OX2R expressed in CHO-K1 cells by FLIPR calcium flux assay
Effective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit programEffective agonist concentration to the human Orexin receptor type 2 was determined using the Xlfit program
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calciumAgonist activity at human OX2R expressed in CHO-K1 cells assessed as increase in intracellular calcium
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Agonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assayAgonist activity at human OX2R stably expressed in CHO RD-HGA16 cells assessed as fluorescence changes measured after 30 mins by calcium mobilization assay
Agonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assayAgonist activity at human OX2 receptor overexpressed in CHO-RD-HGA16 cells assessed as calcium mobilization after 15 mins by fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human OX2R expressed in CHO cells incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
Agonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Agonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assayAgonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as increase in intracellular Ca2+ mobilization by measuring IP3 production incubated for 2 hrs by IP-one detection reagent based fluorescence assay
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced calcium flux preincubated for 120 mins followed by orexin-A induction measured every 1 sec by FLIPR assayAntagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced calcium flux preincubated for 120 mins followed by orexin-A induction measured every 1 sec by FLIPR assay
Antagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced calcium flux preincubated for 120 mins followed by orexin-A induction measured every 1 sec by FLIPR assayAntagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced calcium flux preincubated for 120 mins followed by orexin-A induction measured every 1 sec by FLIPR assay
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assayAntagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assay
Antagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assayAntagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assayAntagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assay
Antagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assayAntagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium release by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium release by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium release by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium release by FLIPR assay
Antagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced Ca2+ flux preincubated for 5 mins followed by orexin-A induction measured 1 sec interval for 5 mins by FLIPR assayAntagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced Ca2+ flux preincubated for 5 mins followed by orexin-A induction measured 1 sec interval for 5 mins by FLIPR assay
Antagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced Ca2+ flux preincubated for 5 mins followed by orexin-A induction measured 1 sec interval for 5 mins by FLIPR assayAntagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced Ca2+ flux preincubated for 5 mins followed by orexin-A induction measured 1 sec interval for 5 mins by FLIPR assay
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Agonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysisAgonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysis
Agonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysisAgonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysis
Antagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assayAntagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assay
Antagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assayAntagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assay
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assayAntagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assay
Antagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assayAntagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.
Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cell membranes assessed as inhibition of orexin-A-induced intracellular calcium release after 120 minsAntagonist activity at human OX2R expressed in CHO cell membranes assessed as inhibition of orexin-A-induced intracellular calcium release after 120 mins
Antagonist activity at human OX2R expressed in CHO cell membranes assessed as inhibition of orexin-A-induced intracellular calcium release after 120 minsAntagonist activity at human OX2R expressed in CHO cell membranes assessed as inhibition of orexin-A-induced intracellular calcium release after 120 mins
Antagonist activity at human OX2R expressed in CHO cell membranes assessed as inhibition of orexin-A-induced intracellular calcium release after 120 minsAntagonist activity at human OX2R expressed in CHO cell membranes assessed as inhibition of orexin-A-induced intracellular calcium release after 120 mins
Antagonist activity at human OX2R expressed in CHO cell membranes assessed as inhibition of orexin-A-induced intracellular calcium release after 120 minsAntagonist activity at human OX2R expressed in CHO cell membranes assessed as inhibition of orexin-A-induced intracellular calcium release after 120 mins
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium release by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium release by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium release by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium release by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium release by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium release by FLIPR assay
Antagonist activity at human OX2R expressed in CHO/dhfr- cells assessed as inhibition of orexin A-induced intracellular Ca2+ mobilization preincubated for 5 mins followed by orexin A addition measured for 3 mins by FDSS assayAntagonist activity at human OX2R expressed in CHO/dhfr- cells assessed as inhibition of orexin A-induced intracellular Ca2+ mobilization preincubated for 5 mins followed by orexin A addition measured for 3 mins by FDSS assay
Antagonist activity at human OX2R expressed in CHO/dhfr- cells assessed as inhibition of orexin A-induced intracellular Ca2+ mobilization preincubated for 5 mins followed by orexin A addition measured for 3 mins by FDSS assayAntagonist activity at human OX2R expressed in CHO/dhfr- cells assessed as inhibition of orexin A-induced intracellular Ca2+ mobilization preincubated for 5 mins followed by orexin A addition measured for 3 mins by FDSS assay
Antagonist activity at recombinant orexin-2 receptor (unknown origin) expressed in CHO cells assessed as inhibition of orexin-A-induced Ca2+ flux preincubated for 120 mins followed by orexin-A induction measured every 1 sec by FLIPR assayAntagonist activity at recombinant orexin-2 receptor (unknown origin) expressed in CHO cells assessed as inhibition of orexin-A-induced Ca2+ flux preincubated for 120 mins followed by orexin-A induction measured every 1 sec by FLIPR assay
Antagonist activity at recombinant orexin-2 receptor (unknown origin) expressed in CHO cells assessed as inhibition of orexin-A-induced Ca2+ flux preincubated for 120 mins followed by orexin-A induction measured every 1 sec by FLIPR assayAntagonist activity at recombinant orexin-2 receptor (unknown origin) expressed in CHO cells assessed as inhibition of orexin-A-induced Ca2+ flux preincubated for 120 mins followed by orexin-A induction measured every 1 sec by FLIPR assay
Antagonist activity at recombinant orexin-2 receptor (unknown origin) expressed in CHO cells assessed as inhibition of orexin-A-induced Ca2+ flux preincubated for 120 mins followed by orexin-A induction measured every 1 sec by FLIPR assayAntagonist activity at recombinant orexin-2 receptor (unknown origin) expressed in CHO cells assessed as inhibition of orexin-A-induced Ca2+ flux preincubated for 120 mins followed by orexin-A induction measured every 1 sec by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Agonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysisAgonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysis
Agonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysisAgonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysis
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at OX2 receptor assessed as inhibition of calcium flux by FLIPR assayAntagonist activity at OX2 receptor assessed as inhibition of calcium flux by FLIPR assay
Antagonist activity at OX2 receptor assessed as inhibition of calcium flux by FLIPR assayAntagonist activity at OX2 receptor assessed as inhibition of calcium flux by FLIPR assay
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin-2 receptor assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 30 mins by cell-based FLIPR assayAntagonist activity at human orexin-2 receptor assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 30 mins by cell-based FLIPR assay
Antagonist activity at human orexin-2 receptor assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 30 mins by cell-based FLIPR assayAntagonist activity at human orexin-2 receptor assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 30 mins by cell-based FLIPR assay
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assayAntagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assay
Antagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assayAntagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assayAntagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assay
Antagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assayAntagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assayAntagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assay
Antagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assayAntagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Agonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysisAgonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysis
Agonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysisAgonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assayAntagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assay
Antagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assayAntagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at rat OX2 receptor assessed as inhibition of Ala-6,12 orexin-A-induced calcium increase preincubated for 5 mins prior to Ala-6,12 orexin-A addition measured at 1 sec intervals for 1 min by Fluo-4AM dye-based FLIPR assayAntagonist activity at rat OX2 receptor assessed as inhibition of Ala-6,12 orexin-A-induced calcium increase preincubated for 5 mins prior to Ala-6,12 orexin-A addition measured at 1 sec intervals for 1 min by Fluo-4AM dye-based FLIPR assay
Antagonist activity at rat OX2 receptor assessed as inhibition of Ala-6,12 orexin-A-induced calcium increase preincubated for 5 mins prior to Ala-6,12 orexin-A addition measured at 1 sec intervals for 1 min by Fluo-4AM dye-based FLIPR assayAntagonist activity at rat OX2 receptor assessed as inhibition of Ala-6,12 orexin-A-induced calcium increase preincubated for 5 mins prior to Ala-6,12 orexin-A addition measured at 1 sec intervals for 1 min by Fluo-4AM dye-based FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.
Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assayAntagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assay
Antagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assayAntagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assayAntagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assay
Antagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assayAntagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assay
Antagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced Ca2+ flux preincubated for 5 mins followed by orexin-A induction measured 1 sec interval for 5 mins by FLIPR assayAntagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced Ca2+ flux preincubated for 5 mins followed by orexin-A induction measured 1 sec interval for 5 mins by FLIPR assay
Antagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced Ca2+ flux preincubated for 5 mins followed by orexin-A induction measured 1 sec interval for 5 mins by FLIPR assayAntagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced Ca2+ flux preincubated for 5 mins followed by orexin-A induction measured 1 sec interval for 5 mins by FLIPR assay
Antagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced Ca2+ flux preincubated for 5 mins followed by orexin-A induction measured 1 sec interval for 5 mins by FLIPR assayAntagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced Ca2+ flux preincubated for 5 mins followed by orexin-A induction measured 1 sec interval for 5 mins by FLIPR assay
Antagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced Ca2+ flux preincubated for 5 mins followed by orexin-A induction measured 1 sec interval for 5 mins by FLIPR assayAntagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced Ca2+ flux preincubated for 5 mins followed by orexin-A induction measured 1 sec interval for 5 mins by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Agonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysisAgonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysis
Agonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysisAgonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysis
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Agonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysisAgonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysis
Agonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysisAgonist activity at human OX2 receptor expressed in CHO cells incubated for 1 to 2 hrs by IP-1 reagent based fluorescence analysis
Antagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.
Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assayAntagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assay
Antagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assayAntagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assayAntagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assay
Antagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assayAntagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assay
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assay
Antagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assayAntagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assay
Antagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assayAntagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assay
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assay
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.
Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assayAntagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assay
Antagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assayAntagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin A-induced intracellular Ca2+ release by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assay
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assayAntagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assay
Antagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assayAntagonist activity at human orexin receptor 2 expressed in CHO cells assessed as inhibition of orexin-A-induced calcium flux by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assayAntagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assay
Antagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assayAntagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assay
Antagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assayAntagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assay
Antagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assayAntagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced calcium flux preincubated for 120 mins followed by orexin-A induction measured every 1 sec by FLIPR assayAntagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced calcium flux preincubated for 120 mins followed by orexin-A induction measured every 1 sec by FLIPR assay
Antagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced calcium flux preincubated for 120 mins followed by orexin-A induction measured every 1 sec by FLIPR assayAntagonist activity at human orexin-2 receptor expressed in CHO cells assessed as inhibition of human orexin-A-induced calcium flux preincubated for 120 mins followed by orexin-A induction measured every 1 sec by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assayAntagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assay
Antagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assayAntagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assay
Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.
Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.Fluorescent Imaging Plate Reader (FLIPR) Assay: Orexin antagonist activity was determined by measuring changes in intracellular calcium levels using a Ca2+ sensitive fluorescent dye. The changes in fluorescent signal were monitored by Fluorescent Imaging Plate Reader (FLIPR®) technology available from Molecular Devices, LLC, U.S.A. Orexin mediated increases in intracellular Ca2+ concentration were readily detected upon activation with orexin-A. Twenty-four hours prior to the assay, RBL-2H3 cells stably expressing either human orexin receptor 1 or human orexin receptor 2 were seeded in cell culture medium in black, clear-bottom 384-well plates (commercially available from Corning Inc., U.S.A.) and grown overnight at 37 °C., 5% CO2. On the day of the assay, cell culture media was removed and cells were loaded with Calcium 5 Dye (commercially sold by Molecular Devices, LLC, U.S.A.) for 1 hour at 37 °C., 5% CO2.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assayAntagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assay
Antagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assayAntagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assay
Antagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assayAntagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assay
Antagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assayAntagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Antagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assayAntagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assay
Antagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assayAntagonist activity at OX2 receptor expressed in CHO cells assessed as inhibition of OXA-stimulated intracellular calcium mobilization after 30 mins by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assayAntagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assay
Antagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assayAntagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assayAntagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assay
Antagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assayAntagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assayAntagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assay
Antagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assayAntagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at OX2 receptor assessed as inhibition of calcium flux by FLIPR assayAntagonist activity at OX2 receptor assessed as inhibition of calcium flux by FLIPR assay
Antagonist activity at OX2 receptor assessed as inhibition of calcium flux by FLIPR assayAntagonist activity at OX2 receptor assessed as inhibition of calcium flux by FLIPR assay
Antagonist activity at OX2 receptor assessed as inhibition of calcium flux by FLIPR assayAntagonist activity at OX2 receptor assessed as inhibition of calcium flux by FLIPR assay
Antagonist activity at OX2 receptor assessed as inhibition of calcium flux by FLIPR assayAntagonist activity at OX2 receptor assessed as inhibition of calcium flux by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assayAntagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assay
Antagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assayAntagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assay
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assayAntagonist activity at human OX2R expressed in CHO cells assessed as reduction in [Ala6,12]orexin-A-induced intracellular Ca2+ mobilization incubated for 30 mins by Fluo-4AM dye based fluorescence assay
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of orexin A-induced calcium influx by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assayAntagonist activity at human OX2 receptor expressed in CHO cells assessed as inhibition of calcium mobilization by FLIPR assay
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assayAntagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assay
Antagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assayAntagonist activity at OX2R expressed in dihydrofolate reductase deficient CHO cells assessed as inhibition of orexin A-induced intracellular calcium mobilization by FLIPR assay
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Inhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysisInhibition of human orexin-2 receptor expressed in CHO cells assessed as calcium release preincubated for 120 mins followed by addition of orexin-A by fluo-4 AM based-FLIPR analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed intracellular calcium mobilization by FLIPR assay
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.FLIPR Ca2+ Flux Assay: Chinese hamster ovary (CHO) cells expressing the rat orexin-1 receptor or the human orexin-2 receptor, are grown in Iscove's modified DMEM containing 2 mM L-glutamine, 0.5 g/ml G418, 1% hypoxanthine-thymidine supplement, 100 U/ml penicillin, 100 ug/ml streptomycin and 10% heat-inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into Becton-Dickinson black 384-well clear bottom sterile plates coated with poly-D-lysine. All reagents were from GIBCO-Invitrogen Corp. The seeded plates are incubated overnight at 37° C. and 5% CO2. Ala-6,12 human orexin-A as the agonist is prepared as a 1 mM stock solution in 1% bovine serum albumin (BSA) and diluted in assay buffer (HBSS containing 20 mM HEPES, 0.1% BSA and 2.5 mM probenecid, pH7.4) for use in the assay at a final concentration of 70 pM. Test compounds are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates, first in DMSO, then assay buffer. On the day of the assay, cells are washed 3 times with 100 ul assay buffer and then incubated for 60 min (37° C., 5% CO2) in 60 ul assay buffer containing 1 uM Fluo-4AM ester, 0.02% pluronic acid, and 1% BSA. The dye loading solution is then aspirated and cells are washed 3 times with 100 ul assay buffer. 30 ul of that same buffer is left in each well. Within the Fluorescent Imaging Plate Reader (FLIPR, Molecular Devices), test compounds are added to the plate in a volume of 25 ul, incubated for 5 min and finally 25 ul of agonist is added. Fluorescence is measured for each well at 1 second intervals for 5 minutes and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 70 pM Ala-6,12 orexin-A with buffer in place of antagonist.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in HEK293 cells assessed as inhibition of orexin-induced calcium mobilization after 60 mins by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysisAntagonist activity at human recombinant OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intracellular Ca2+ release preincubated for 30 mins followed by orexin-A stimulation by Fluo-4AM dye based fluorescence analysis
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 1 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium mobilization after 5 mins by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
Antagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assaysAntagonist activity at human OX2R expressed in CHOK1 cells assessed as reduction in orexin A-induced calcium flux preincubated followed by orexin A addition by FLIPR assays
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced intracellular calcium level after 60 mins by FLIPR assay
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Antagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assayAntagonist activity at human OX2 receptor expressed in HEK293 cells assessed as inhibition of human orexin-A-stimulated calcium release by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
Inhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assayInhibition of human OX2 receptor expressed in CHO cells assessed as intercellular calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assayAntagonist activity against human OX2R expressed in CHOK1 cells assessed as inhibition of orexin A-induced intercellular Ca2+ mobilization by FLIPR assay
Antagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assayAntagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assay
Antagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assayAntagonist activity at human OX2 receptor assessed as Ca2+ flux by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assayAntagonist activity at human OX2R expressed in CHO cells assessed as orexin A-induced intracellular Ca2+ mobilization preincubated for 120 mins followed by orexin A addition by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
Antagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assayAntagonist activity at human orexin 2 receptor expressed in CHO cells assessed as inhibition of orexin-A-induced calcium mobilization by FLIPR assay
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.In Vitro Assay: Intracellular Calcium Measurements : In Vitro Assay: Intracellular Calcium Measurements:Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 g/ml G418, 100 U/ml penicillin, 100 g/ml streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES for use in the assay at a final concentration of 3 nM.Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/l and 20 mM HEPES. On the day of the assay, 50 μl of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/l, 5 mM probenecid (Sigma) and 3 M of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at RT for 30 min before measurement.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.
Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1:1), diluted in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES for use in the assay at a final concentration of 3 nM. Antagonists are prepared as 10 mM stock solution in DMSO, then diluted in 384-well plates using DMSO followed by a transfer of the dilutions into in HBSS containing 0.1% bovine serum albumin (BSA), NaHCO3: 0.375 g/L and 20 mM HEPES. On the day of the assay, 50 μL of staining buffer (HBSS containing 1% FCS, 20 mM HEPES, NaHCO3: 0.375 g/L, 5 mM probenecid (Sigma) and 3 μM of the fluorescent calcium indicator fluo-4 AM (1 mM stock solution in DMSO, containing 10% pluronic) is added to each well. The 384-well cell-plates are incubated for 50 min at 37° C. in 5% CO2 followed by equilibration at rt for 30 min before measurement. Within the Fluorescent Imaging Plate Reader (FLIPR Tetra, Molecular Devices), antagonists are added to the plate in a volume of 10 μL/well, incubated for 120 min and finally 10 μL/well of agonist is added. Fluorescence is measured for each well at 1 second intervals, and the height of each fluorescence peak is compared to the height of the fluorescence peak induced by 3 nM orexin-A with vehicle in place of antagonist.Intracellular Calcium Assay: Chinese hamster ovary (CHO) cells expressing the human orexin-1 receptor and the human orexin-2 receptor, respectively, are grown in culture medium (Ham F-12 with L-Glutamine) containing 300 μg/mL G418, 100 U/mL penicillin, 100 μg/mL streptomycin and 10% heat inactivated fetal calf serum (FCS). The cells are seeded at 20,000 cells/well into 384-well black clear bottom sterile plates (Greiner). The seeded plates are incubated overnight at 37° C. in 5% CO2. Human orexin-A as an agonist is prepared as 1 mM stock solution in MeOH:water (1: