In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

Activation of YFP-tagged ACKR3 (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay

Agonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

Modulation of prolink-tagged human CXCR7 expressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment after 30 mins by beta-galactosidase reporter assayModulation of prolink-tagged human CXCR7 expressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment after 30 mins by beta-galactosidase reporter assay

Modulation of prolink-tagged human CXCR7 expressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment after 30 mins by beta-galactosidase reporter assayModulation of prolink-tagged human CXCR7 expressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment after 30 mins by beta-galactosidase reporter assay

Activation of YFP-tagged ACKR3 D179N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 D179N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay

Activation of YFP-tagged ACKR3 D179N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 D179N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).

In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).